Filter Cartridge

Product Details:

Sandwich Basket : This housing is fabricated for higher filteration capacity by providing sandwich type mesh for higher permeability & good integrity.

• Micron Rating Of Mesh : 25 Li to 200 Li
• Material Of Construction : (M.O.C) 410, 202, 304, 316, 316L Quality Stainless Steel

Product Details:

We are the Leading Manufacturer of Sintered PP Filter Cartridge.

Product Details:

Pleated Filter Cartridge comprises of filters that contain polypropylene pleated media for achieving fine filtration as well as high process efficiency while being applied in different industrial filtration applications. The superior design finish of these multi-layer filters also helps in achieving consistent filtration where the main filter traps contaminants in different depths so as to provide large dirt holding capacity. 

 

Features:

• Pleated filter cartridges containing polypropylene pleated media
• Allows fine filtration to suit various industrial filtration processes
• Superior design of multi-layer filter allows maintaining consistent filtration standards
• Superior dirt holding capacity
• Coming with optimised pleat height and density to ensure lowest possible pressure drop
• Designed to deliver maximised service life
• Available in different micron ratings

Product Details:

Pleated Filter Cartridge comprises of filters that contain polypropylene pleated media for achieving fine filtration as well as high process efficiency while being applied in different industrial filtration applications. The superior design finish of these multi-layer filters also helps in achieving consistent filtration where the main filter traps contaminants in different depths so as to provide large dirt holding capacity. 

 

Features:

• Pleated filter cartridges containing polypropylene pleated media
• Allows fine filtration to suit various industrial filtration processes
• Superior design of multi-layer filter allows maintaining consistent filtration standards
• Superior dirt holding capacity
• Coming with optimised pleat height and density to ensure lowest possible pressure drop
• Designed to deliver maximised service life
• Available in different micron ratings

Product Details:

We are the Leading Manufacturer of 316 SS Filter Cartridges.

Product Details:

FILTER CARTRIDGE FOR DUST FILTERS:- 

Suitable for Ground mounted Reverse Pulse Jet or Vibratory Type or for Dust Collector on Silo Top.

Product Details:

We are the Leading Manufacturer of Sintered Powder Filter Cartridge.

Product Details:

Polypropylene filter cartridges are precisely manufactured for use in critical filtration applications within food, pharmaceuticals, biotech, dairy, beverages, brewing, semiconductor, water treatment & other demanding process industries.

Polypropylene pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micron ratings, high flow rates and high contaminant holding capacities. A special combination of polypropylene media with variation in the fiber diameter creates a gradient density matrix, ranging from open on the outside to finer on the inside, thereby providing a filter with in filter, which considerably increases contamination holding capacity & throughputs.

All components used in the manufacturing process are biologically safe, chemically inert and meet FDA and other international quality requirements. Polypropylene offers an extremely broad chemical compatibility making it suitable for many applications.

Product Details:

We are the Leading Manufacturer of SS Wire Mesh Filter Cartridges.

Product Details:

Our range is highly appreciated for high efficiency, sturdy construction, low maintenance and corrosion resistance. The array of products offered by us is in accordance with the international quality standards. We are well-equipped with the state-of-the-art manufacturing facility that enables us to fabricate our range as per the industry norms.

Product Details:

We are one of the leading supplier and manufacturer of SS Multi Cartridge Filter. The SS multi cartridge filter we manufacture is of best quality Stainless steel.
Stainless Steel Multi Cartridge Filter meet general purpose Industrial and Commercial Filtration needs. All whetted surfaces are constructed of SS 304 / SS 316 / SS 316L and are mirror polished, providing excellent corrosion resistance. This multi cartridge housing can consist of 3, 5 or up to 50 Cartridges to give the desired flow rate as per customer requirement. The housing is compatible with 10" to 40" filter elements. The housing can support both Double Open End (DOE) and Code-7 Type Cartridges. The design of the housing provides for positive seal with the filters thereby preventing fluid by pass.

Benefits & Features:

• Stainless Steel construction provides excellent Corrosion Protection for rugged, long-lasting service.
• Mirror Polish finish eliminates possible contamination which could leach into the process chemicals.
• Housing drain allows full drainage of chambers for optimized filter change out.
• Provision for Air Venting before start-up for more efficient filter operation.
• Allows for use of both (Double Open End) or (Single Open End) Cartridges

Additional Information

Product Details:

FILTER CARTRIDGES

We offer filter cartridges and pleated dust collection cartridges. SS pleated filter cartridges, washable net filter cartridges and pleated PP high efficiency cartridges etc. Construction: Pleated filter media is covered inner side and/or outer side by metal mesh or mesh made from SS/ galvanized steel sheet, flanges at both ends with lugs. Pleated filter media fixed in top and bottom caps made from SS/galvanized steel sheet. Rubber or polyurethane gasket may provide on the top and bottom side or either side of the collectors. Filter media used in this type of cartridges are filter paper of various GSM with special treatment like antistatic, PTFE coating, water/oil repellence coating.

Product Details:

Glass Fiber Filter Cartridge are adsorptive depth filters, designed for venting applications in the industry, by removal of particles from the air stream, extending the service life of sterilizing-grade air filters.

Features:

• Superior dirt-holding capacity
• High throughputs and high adsorption
• Reliable retention of particulates
• Cost-effective and long service life
• High flow rates at a low-pressure drop

Product Details:

Borosilicate Glassfiber Pleated Cartridge With Acrylic Binder Provide Superior Filteration Perfomation In Major Application Of Oil & Gas Like Mildstream Process Water , Upstream Injection Water & SRU Surface Water Discharge And Many More

Product Details:

High Flow Cartridges Are Used In Application Where Large Surface Area WIth High Flow Rate Required It Provide High Dirt Holding Capacity WIth Higher Filter Efficiency

Product Details:

Resin Bonded Filter Cartridge features an Acrylic Fiber-Phenolic resin/ Cellulose Fibers-Melamine Resin construction that produces an extremely rigid pore structure. This construction allows the filter to withstand extreme viscosities and temperature without compression or collapse. In addition, a true graded density construction allows complete utilization of the filter's depth, with coarse particles captured in the outer zones and finer particles captured in the inner qualifying zone.

Applications:

• Paints & Resins
• Inks
• Adhesives
• Lacquers, Varnishes
• Fuel Oils, Crude Oils
• Machine Coolants
• Dielectric Oils
• Lube Oil
• Cutting Oil
• Plasticizers

Media:

• Acrylic Fibers bonded with Phenolic Resin
• Cellulose Fibers bonded with Melamine Resin (CFR 21 Listed )

Removal Ratings:

• 1, 5, 10, 25, 50, 75, 100,125 150 µm

Other Details:

• Maximum Operating Temp: 121°c
• Recommended Change out differential pressure: 35psi

Product Details:

Resin Bonded Filter Cartridge features an Acrylic Fiber-Phenolic resin/ Cellulose Fibers-Melamine Resin construction that produces an extremely rigid pore structure. This construction allows the filter to withstand extreme viscosities and temperature without compression or collapse. In addition, a true graded density construction allows complete utilization of the filter's depth, with coarse particles captured in the outer zones and finer particles captured in the inner qualifying zone.

Applications:

• Paints & Resins
• Inks
• Adhesives
• Lacquers, Varnishes
• Fuel Oils, Crude Oils
• Machine Coolants
• Dielectric Oils
• Lube Oil
• Cutting Oil
• Plasticizers

Media:

• Acrylic Fibers bonded with Phenolic Resin
• Cellulose Fibers bonded with Melamine Resin (CFR 21 Listed )

Removal Ratings:

• 1, 5, 10, 25, 50, 75, 100,125 150 µm

Other Details:

• Maximum Operating Temp: 121°c
• Recommended Change out differential pressure: 35psi

Product Details:

We are instrumental in manufacturing and supplying qualitative range of Sintered Filter Cartridge. The range is manufactured using the process of sistering that involves making of articles from its base material in powder. Similarly, the range is made by heating or sistering the article in a controlled atmosphere furnace, which is made by mixing elemental or alloy powders and compacting the mixture in a die. Created with utmost precision and using this process, these cartridges allows any fluid, air or gas to pass through without disturbing its structure but removing foreign particles above stipulated micron rating. Easy to use and maintain, our high performing range is able to withstand very high differential pressure across the filters.

Applications:

• Compressed air filtration
• Gas filtration
• Electronics
• Metal Finishing
• Water Treatment
• Petrochemicals